| Specifications |
| Basic Specifications |
SOC |
Rockchip RK3576
|
|
Octa-core 64-bit processor (4×A72 + 4×A53) with a maximum frequency of 2.2GHz
|
| GPU |
G52 MC3@1GHz, support OpenGL ES 1.1/2.0/3.2, OpenCL 2.0, Vulkan 1.1,
embedded with high-performance 2D acceleration hardware
|
| NPU |
6 TOPS NPU, It supports INT4/INT8/INT16/FP16/BF16/TF32 operations
|
| ISP |
Built-in 16 million pixel ISP, support low-light noise reduction, support RGB-IR sensor,
support up to 120dB HDR, AI-ISP to improve low-noise image effect
|
Decoding/
Encoding |
Decoding: 4K@120fps (H.265/HEVC, VP9, AVS2, AV1), 4K@60fps (H.264/AVC)
Encoding: 4K@60fps (H.265/HEVC, H.264/AVC)
|
|
RAW
|
LPDDR4/LPDDR4x (4GB/8GB/16GB optional)
|
| Storage |
eMMC (16GB/32GB/64GB/128GB/256GB optional), UFS2.0 (Optional)
|
Power
consumption
|
Max: 6W(5V/1200mAh), Normal: 0.75W(5V/150mAh), Min: 0.025W(5V/5mAh)
|
| Power |
5.0V (voltage tolerance ± 5%)
|
| OS |
Android14、Linux OS、Buildroot
|
| Software |
·The private deployment of ultra-large-scale parameter models under the Transformer architecture,
including large language models such as Gemma-2B, LlaMa2-7B, ChatGLM3-6B, Qwen1.5-1.8B
·Traditional network architectures such as CNN, RNN, and LSTM; a variety of deep learning frameworks,
including TensorFlow, PyTorch, MXNet, PaddlePaddle, and ONNX, as well as custom operator development
·Docker container management technology
|
| Size |
60.00mm × 42.95mm × 5.68mm
|
| Weight |
≈15g
|
| Environment |
Operating Temperature: -20℃- 60℃,
Storage Temperature: -20℃ ~ 70℃,
Storage Humidity: 10%～90%RH (non-condensing)
|
| Interface Specifications |
Internet |
2 × GMAC (providing RMII or RGMII interfaces to connect external Ethernet PHY);
Supports 10/100/1000 Mbps speeds), expandable WIFI, BT, 4G, 5G through USB, PCIE, SDIO, UART
|
| Video Input |
2 × MIPI DPHY CSI (Supports MIPI V1.2 version; 1 × 4 Lanes or 2 × 2 Lanes)
1 × MIPI DCPHY CSI RX (DPHY supports V2.0 version with 4Lane/2Lane/1Lane modes;
CPHY supports V1.1 version with 0/1/2 Trio modes)
1 × DVP (8/10/12/16-bit, BT.601/BT.656 and BT.1120)
|
| Video Output |
1 × HDMI2.1(4096x2160@120Hz)/eDP1.3(4096×2160@60Hz,
supports 1Lane/2Lane/4Lane modes), 1 × DP1.4 (4096×2160@120Hz)
1 × EBC Output interface (support E-ink EPD (Electronic Paper Display), 2560×1920)
1 × MIPI_DCPHY_TX (Supports V2.0 version and 0/1/2/3 Lane mode;
C-PHY supports V1.1 version and 0/1/2 Trio mode; 2560×1600@60Hz)
1 × LCDC TX (Supports parallel 24 bit RGB mode) 1920×1080@60Hz 16 bit BT1120 mode,
1920×1080@60Hz 8-bit BT656 mode, 720×576@60Hz And MCU mode)
|
| Audio |
2 × SAI (4T/4R), 3 × SAI (1T/1R), supports I2S/TDM/PCM mode, and supports sampling rates up to 192KHz
2 × SPDIF TX & RX (8ch; Supports up to 24bits resolution)
2 × PDM (Up to 8 channels, audio resolution 16~24 bits, sample rate up to 192KHz, support PDM master receive mode)
2 × DSM (Double-rate interface supported; Supports 8-wire and 16-wire serial transmission modes;
DSMC_CLKP/N up to 100MHz)
|
| PCIe/SATA |
1 × PCle 2.1/SATA 3.1/USB 3.2 Gen1 Combo interfaces
1 × PCle 2.1/SATA 3.1 Combo interfaces
|
| USB |
1 × USB3.2 Gen1 OTG0 (multiplexed with DP1.4)
1 × USB3.2 Gen1 OTG1 (multiplexed with PCle 2.1/SATA 3.1)
|
| SDIO |
2 × SDIO3.0
|
| PWM |
16 × PWM
|
| SPI |
5 × SPI (Supports serial master and serial slave modes, software configurable)
|
| I2C |
10 × I2C (Supports 7-bit and 10-bit address modes, data rates up to 100kbps in standard mode and up to 400kbps in fast mode)
|
| I3C |
2 × I3C (I2C compliant, SDR mode supported, up to 10 devices supported)
|
| UART |
12 × UART (Support automatic flow control mode, support RS485 function)
|
| CAN |
2 × CAN FD (Supports 8192 bit receive FIFO)
|
| Watch dogs |
External watchdog support (on-board watchdog IC)
|
| SARADC |
7 × SARADC + 1 × SARADC (boot only), supports 12-bit resolution, up to 1MS/s sampling rate
|
