Firefly-RK3399 Buy Specs

Equipped with a six-core 64-bit "server class" processor Rockchip RK3399, and with 2GB/4GB DDR3 and 16G/32GB eMMC, as well as increases PCIe 2.1 M.2, DP 1.2, Type-C, USB3.0 and other high-performance data transmission and display interface.

MaskRon

Update time：2018-01-29 Views：7045

Introduction

MaskRom mode is the bottom line preventing the device from bricking. Enforcing device into MaskRom mode involves hardware operation, which is risky. Therefore, please try to put the device into Loader mode, or boot the device with sd-card, before risking MaskRom mode.

Please read and operate with great care!

Firefly-RK3399 enter MaskRom mode

principle：
Artificial to the Flash data pin connected to ground, the system will think Flash data error, so clearing the Flash data.
1.Locate test point TP31 and TP32, which are on the back, as following images show:

rk3399_maskrom

2. Power down the device.
3. Plug out SD card.
4. Use a micro USB Type-C cable to connnect device and host pc.
5. Use metal tweezers to keep TP31 and TP32 connected.
6. Power on the board.
7. Wait a moment, then release the metal tweezers.
Device should enter MaskRom mode:

maskrom_AndroidTool

Please check Boot Mode for more detail of MaskRom mode.